Thinkpad X1 2016 (4th) 吃上文图拉（macOS 13.0），EFI分享！！！～
文图拉：设备配置：Model
Thinkpad X1 Carbon Gen 4 20FCS0TR0U
Processor
Core i7-6600U (2C, 2.6 / 3.4GHz, 4MB) vPro
Graphics
Integrated Intel HD Graphics 520
Memory
16GB Soldered 1866MHz DDR3, dual-channel
Display
14" Full HD (2560x1440) IPS, non-touch
Storage
Samsung pm91a 512GB NVMe SSD
Ethernet
Intel Ethernet Connection I219-LM (Jacksonville)
WLAN + Bluetooth
11ac+BT, Intel® Dual Band Wireless-AC 8260NGW, 2x2 card
Camera
HD720p resolution, low light sensitive, fixed focus
Audio support
HD Audio, Conexant CX20753/4 codec, stereo speakers 1Wx2, dual array microphone, combo audio/microphone jack
Keyboard
6-row, spill-resistant, multimedia Fn keys, LED backlight
Battery
Integrated Lithium Polymer 4-cell (52Wh)
BIOS设置：
Intel BIOS settings
Note: Most of these options may not be present in your firmware, we recommend matching up as closely as possible but don't be too concerned if many of these options are not available in your BIOS.
Disable
Fast BootSecure BootSerial/COM PortParallel PortVT-d (can be enabled if you set DisableIoMapper to YES)Compatibility Support Module (CSM) (Must be off in most cases, GPU errors/stalls like gIO are common when this option is enabled)Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)Intel SGXIntel Platform TrustCFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled)
Enable
VT-xAbove 4G DecodingHyper-ThreadingExecute Disable BitEHCI/XHCI Hand-offOS type: Windows 8.1/10 UEFI Mode (some motherboards may require "Other OS" instead)DVMT Pre-Allocated(iGPU Memory): 64MB or higherSATA Mode: AHCI
EFI：分享7天，喜欢的速来～
https://cloud.189.cn/web/share?code=RFZBzeIriuyq（访问码：j9f6） 谢谢 楼主的分享 楼主装了后续航怎么样？我的只能全电只能用4个小时，win下至少8个小时。 下载收藏，谢谢了！ 老哥能说明一下bios版本号及相关设置吗？我也是2016，配置基本一模一样，也想装这个，家里台式机好搞的很，这个感觉有难度的，另外dp和hdmi都是正常的吗？ Intel BIOS settings
Note: Most of these options may not be present in your firmware, we recommend matching up as closely as possible but don't be too concerned if many of these options are not available in your BIOS
#Disable
Fast Boot
Secure Boot
Serial/COM Port
Parallel Port
VT-d (can be enabled if you set DisableIoMapper to YES)
Compatibility Support Module (CSM) (Must be off in most cases, GPU errors/stalls like gIO are common when this option is enabled)
Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
Intel SGX
Intel Platform Trust
CFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled)
#Enable
VT-x
Above 4G Decoding
Hyper-Threading
Execute Disable Bit
EHCI/XHCI Hand-off
OS type: Windows 8.1/10 UEFI Mode (some motherboards may require "Other OS" instead)
DVMT Pre-Allocated(iGPU Memory): 64MB or higher
SATA Mode: AHCI 感谢，同配置本子 第一次安装跑代码的时候会直接重启，我的电脑和你不一样的地方只有三处，1，sn750 2t的硬盘，2，ax201的网卡，3，有4g上网，会不会是这个导致的原因 把驱动取消一些，再试试。先安装好系统后再勾选～ 首先感谢楼主。我也测试了一下，和楼上一样，mach reboot重启了，看错误是iog flags 0x3，貌似还是显卡的问题。看楼主发的bios设置，推测是我的biso里的DVMT没有pj，无法设置到64MB的原因？